MACMA FM300 2 HP 1500CFM 2x100mm inlet ports (5170232)
A great value for money dust collector for industrial or home workshop use. It has a 2 hp motor driving a fully balanced heavy duty fan/impeller constructed from mild steel and has a rated air flow of up to 1500 cubic feet per minute [+ or - 10 percent, the flow could be lower and is dependent on the length and diameter of your suction pipes]. It is has top and bottom nylon filter bags, the bags measure 500mm in diameter by 850mm deep and are held in place by an over centre clip type steel strap. The collector has a 127mm inlet and is supplied with a Y splitter - 127mm to 2 x 100mm a 100mm so as to facilitate taking dust off two machines at the same time, a 100mm cap is provided in the advent that only one of the 100mm inlets is required. This model has a metal transfer Duct making it stronger than others with flexible hose connection.
TIP
NEED TO WASH COLLECTION BAGS : After a sustained period of use the pores in the collection bags will clog - substantially reducing the efficiency of the collector, we recommend that the filter bags be washed when a reduction in efficiency is noticed, this is easily done by simply draping the bags over a line and hosing them off with a garden hose, please ensure that the collector bags have fully dried out before re installing them.
Specifications
| Motor | 2 HP x 240 volt |
| Inlet | 127 mm or 2 x 100 mm |
| Height | 1950 mm |
| Depth | 850 mm |
| Width | 560 mm |
SCF5060 Cartridge Filter 1 Micron for 500mm Diameter